Loler Training Level 3

SkillWise

• Introduction 05:06

  • 1: Introduction Preview 01:05
  • 2: Advanced LOLER Compliance and Enforcement Preview 00:31
  • 3: Cross-Regulation Analysis: LOLER, PUWER, and HSWA 00:55
  • 4: Enforcement Actions and Legal Ramifications 00:48
  • 5: Role of HSE and Approved Codes of Practice (ACoPs) 00:45
  • 6: Strategic Risk Management for Duty Holders 01:02

• Complex Lifting Scenarios and Risk Management 04:54

  • 7: Complex Lifting Scenarios and Risk Management 00:39
  • 8: Lifting at Height and Over Obstacles 00:46
  • 9: Tandem and Multi-Crane Operations 01:03
  • 10: Dynamic Loads and Wind Factors 00:50
  • 11: Mitigating Operational Risks in Critical Environments 01:36

• Technical Specifications and Equipment Engineering 05:21

  • 12: Technical Specifications and Equipment Engineering 00:35
  • 13: Load Path Analysis and Stress Factors 00:53
  • 14: Chain Slings, Wire Ropes, and Special Attachments 01:09
  • 15: Testing and Re-Certification Processes 01:08
  • 16: Engineering Controls and Fail-Safe Systems 01:36

• Planning and Supervision of Complex Operations 05:02

  • 17: Planning and Supervision of Complex Operations 00:35
  • 18: Role of the Appointed Person 00:49
  • 19: Writing and Validating a Lifting Plan 01:03
  • 20: Coordination with Contractors and Third Parties 01:07
  • 21: Toolbox Talks and On-Site Briefings 01:28

• Incident Response and Continuous Improvement 04:24

  • 22: Incident Response and Continuous Improvement 00:31
  • 23: Responding to Equipment Failures and Near Misses 01:02
  • 24: Root Cause Analysis and Preventive Measures 00:52
  • 25: Feedback Loops and Procedure Updates 00:48
  • 26: Building a Safety Culture Through Training 01:11

• Auditing and Performance Evaluation 04:08

  • 27: Auditing and Performance Evaluation 00:38
  • 28: Setting LOLER KPIs and Benchmarking Standards 00:53
  • 29: Internal and External Audit Procedures 00:45
  • 30: Evidence Gathering and Documentation Review 00:49
  • 31: Closing Non-Conformities and Driving Compliance 01:03

• Conclusion 00:49

  • 32: Conclusion 00:49

This programme is about clarity, simplicity, and impact.

Instead of overwhelming you with jargon or endless theory, each module is practical and intuitive. You’ll connect LOLER with PUWER and HSWA, plan complex lifts under pressure, verify engineering controls, lead on-site coordination, learn from incidents, and prove compliance through robust auditing—so you can reduce risk and deliver safe, efficient lifting operations.

Course modules cover the following topics:

• Advanced LOLER Compliance and Enforcement – Cross-regulation alignment (LOLER/PUWER/HSWA), enforcement actions and legal ramifications, HSE and ACoPs, and strategic risk management for duty holders.
• Complex Lifting Scenarios and Risk Management – Lifting at height/over obstacles, tandem and multi-crane operations, dynamic loads and wind factors, and mitigating risks in critical environments.
• Technical Specifications and Equipment Engineering – Load path and stress factors, chain slings/wire ropes/special attachments, testing and re-certification, and engineered fail-safes and controls.
• Planning and Supervision of Complex Operations – Role of the Appointed Person, writing/validating lifting plans, coordinating contractors and third parties, toolbox talks and on-site briefings.
• Incident Response and Continuous Improvement – Responding to failures and near misses, root cause analysis and preventive measures, feedback loops, and procedure updates to build safety culture.
• Auditing and Performance Evaluation – Setting LOLER KPIs and benchmarks, internal/external audits, evidence gathering and document review, and closing non-conformities to drive compliance.

Additional Bonuses Included For Free With The Course

• Additional Reading Materials — curated, practical resources to reinforce key LOLER leadership skills
• Gamified Interactive Quizzes — quick checkpoints that build confidence and embed learning

Learning should feel effortless. This course is more than training — it’s learning, designed beautifully.

• Appointed Persons, lifting supervisors, and senior rigging teams
• Site, projects, and H&S managers overseeing critical lifts
• Contractors in construction, heavy industry, ports, and utilities
• Engineers and planners integrating LOLER with PUWER/HSWA
• Anyone who believes training should feel seamless

• Prior LOLER knowledge (Level 2 or equivalent experience)
• Internet-enabled device

This course prepares you for roles such as:

• Appointed Person (Lifting Operations) – £50,000–£70,000
• Lifting Operations Supervisor – £42,000–£60,000
• Senior Crane Operator / Lift Controller – £40,000–£58,000
• Rigging and Lifting Engineer – £45,000–£65,000
• Health & Safety Manager (LOLER/PUWER) – £48,000–£68,000
• Compliance & Assurance Lead (Lifting) – £50,000–£72,000

There are currently no Q&As for this course. Be the first to ask a question.